Niranjan Traders

Krishi Mahavidyalaya, Pune, Maharashtra

Send Email
0804516818062% Response Rate
Search

Home » Our Products » SS Hardware & Fasteners


SS Hardware & Fasteners

Wholesale Trader of a wide range of products which include head socket set screw flat point, hex head sems screw, pan philips sems screw, double sided threaded stud, ss wing nut and dome nut din 1587.

Head Socket Set Screw Flat Point

REQUEST CALLBACK

Head Socket Set Screw Flat Point
  • Head Socket Set Screw Flat Point
  • Head Socket Set Screw Flat Point
  • Head Socket Set Screw Flat Point
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3 / PieceGet Latest Price

Product Details:
Thread TypeFull Thread
MaterialStainless Steel
Head Height10mm
ColorGrey
Country of OriginMade in India

A flat point socket set screw is a headless fastener with a flat tip that is used for applications where minimal damage to the mating surface is desired, or where frequent re-setting and relocation are needed. The flat point sits against a surface, creating a clamping force when tightened, without digging in or causing damage. 
Yes! I am Interested

Hex Head SEMS Screw

REQUEST CALLBACK

Hex Head SEMS Screw
  • Hex Head SEMS Screw
  • Hex Head SEMS Screw
  • Hex Head SEMS Screw
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 4 / PieceGet Latest Price

Product Details:
Quantity Per Pack100
ColorGrey
Rust ResistantYes
MaterialStainless Steel
Country of OriginMade in India

A Hex Head SEMS screw is a type of fastener that combines a hexagon-shaped screw with a permanently attached washer or washers. The "SEMS" part refers to "Screw with Pre-assembled washer," meaning the washer is pre-installed and remains attached to the screw head. This design simplifies assembly by eliminating the need for separate washers and reducing the risk of washer loss or omission
Yes! I am Interested

PAN Philips SEMS Screw

REQUEST CALLBACK

PAN Philips SEMS Screw
  • PAN Philips SEMS Screw
  • PAN Philips SEMS Screw
  • PAN Philips SEMS Screw
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2 / PieceGet Latest Price

Product Details:
MaterialStainless Steel
Usage/ApplicationIndustrial
Quantity Per Pack100
ColorGrey
Country of OriginMade in India

A PAN Phillips SEMS screw is a type of fastener that combines a standard pan head screw with a captive washer, also known as a Sems assembly. The "PAN" refers to the flat, wide head of the screw, while "Phillips" indicates the head's drive type (cross-shaped recess for a Phillips screwdriver). The "SEMS" portion indicates the pre-assembled washer, which is designed to be held securely in place by the screw. 
Yes! I am Interested

Double Sided Threaded Stud

REQUEST CALLBACK

Double Sided Threaded Stud
  • Double Sided Threaded Stud
  • Double Sided Threaded Stud
  • Double Sided Threaded Stud
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 8 / PieceGet Latest Price

Product Details:
Minimum Order Quantity100 Piece
MaterialStainless Steel
Usage/ApplicationAutomobile Industry
Sizeup to 1.0 inch, 9.5 inch
Quantity Per Pack1x100 Piece
ColorSilver
Fully ThreadedYes

Threaded Stud Both Side (often called a double-ended stud or double-ended threaded rod) is a fastener that has threads on both ends with an unthreaded or partially threaded shank in the middle. It is designed to be screwed into a tapped hole on one end, while the other end accepts a nut or another fastener.

🔩 Threaded Stud Both Side 📌 Key Features:
  • Threading: Threads on both ends, typically with the same thread size and pitch

  • Middle section:

    • Can be fully threaded or have an unthreaded plain shank in the center

    • Length of plain shank varies depending on design

  • Material:

    • Carbon steel (various grades)

    • Stainless steel (A2, A4)

    • Alloy steel or special materials as needed

  • Finish: Plain, zinc plated, galvanized, black oxide, stainless natural, etc.

  •  

Yes! I am Interested

SS Wing Nut

REQUEST CALLBACK

SS Wing Nut
  • SS Wing Nut
  • SS Wing Nut
  • SS Wing Nut
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3 / PieceGet Latest Price

Product Details:
Minimum Order Quantity100 Piece
TypeWing Nut
Head StyleWings
BrandMaadhav Technocast Private Limited
Diameter6 mm
Size10mm

Stainless Steel Wing Nut is a type of nut with two large metal "wings" on either side, allowing it to be tightened or loosened by hand without tools. It’s ideal for applications that require frequent assembly and disassembly.

🔩 SS Wing Nut (Stainless Steel) 📌 Key Features:
  • Shape: Hexagonal body with two wing-like extensions

  • Material:

    • Stainless Steel A2 (304): Good corrosion resistance for general use

    • Stainless Steel A4 (316): Superior corrosion resistance, ideal for marine, food, and chemical environments

  • Thread Types: Metric (M3–M20) and UNC/UNF (imperial)

  • Standard References:

    • DIN 315 – Common standard for wing nuts

    • ISO and ANSI equivalents also exist

Yes! I am Interested

Dome Nut Din 1587

REQUEST CALLBACK

Dome Nut Din 1587
  • Dome Nut Din 1587
  • Dome Nut Din 1587
  • Dome Nut Din 1587
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
MaterialStainless Steel
Nominal Nut DiameterM4 (4 mm)
Material GradeSS304
BrandNiranjan Traders

Dome Nut DIN 1587—also known as an acorn nut—is a hexagonal nut with a closed, domed top that covers the exposed bolt threads. It’s used for safety, aesthetic appearance, and to protect threads from damage, dirt, or corrosion.

🔩 Dome Nut – DIN 1587 📌 Standard:
  • DIN 1587

  • Specifies hexagonal nuts with a domed cap on one side

  • ISO equivalent: ISO 4032 + cap geometry (non-identical)

📐 Key Dimensions (DIN 1587 – Metric Examples)
Thread Size (d)Width Across Flats (s)Overall Height (h)Dome Height (approx.)
M4 7 mm 11.8 mm ~6 mm
M5 8 mm 13.8 mm ~7 mm
M6 10 mm 15.8 mm ~8 mm
M8 13 mm 18 mm ~9 mm
M10 17 mm 22 mm ~12 mm
Yes! I am Interested

Hex Head Bolt With Hole

REQUEST CALLBACK

Hex Head Bolt With Hole
  • Hex Head Bolt With Hole
  • Hex Head Bolt With Hole
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2 / PieceGet Latest Price

Product Details:
Minimum Order Quantity100 Piece
FinishHot Dip Galvanized (HDG)
Bolt DiameterM8 (8 mm)
MaterialStainless Steel
Tensile StrengthStrong
Pack TypeHDPE Bag
BrandNiranjan Traders
Nominal Length16 mm

Hex Head Bolt with Hole is a standard hex head bolt that features a cross-drilled hole through the threaded shaft near the bolt’s end. This hole allows the bolt to be secured with a cotter pin, safety wire, or split pin to prevent it from loosening due to vibration or rotation.

🔩 Hex Head Bolt with Hole 📌 Key Features:
  • Head Type: Standard hexagonal head for wrench or socket tightening

  • Hole:

    • Drilled transversely through the bolt shank near the threaded end

    • Diameter and position depend on bolt size and standards

  • Threading: Fully or partially threaded depending on bolt length

  • Material:

    • Carbon steel (various strength grades like 8.8, 10.9)

    • Stainless steel (A2, A4)

    • Other alloys as needed

  •  

Yes! I am Interested

M8 (8 mm) Stainless Steel Csk Allen Din 7991

REQUEST CALLBACK

M8 (8 mm) Stainless Steel Csk Allen Din 7991
  • M8 (8 mm) Stainless Steel Csk Allen Din 7991
  • M8 (8 mm) Stainless Steel Csk Allen Din 7991
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
MaterialStainless Steel
Bolt DiameterM8 (8 mm)
Pack TypeHDPE Bag
BrandNiranjan Traders
Bolt SizeM4
Nominal Length10 mm

A CSK Allen Screw DIN 7991 is a countersunk socket head cap screw, meaning it has a flat (countersunk) head and is driven with a hex (Allen) key. It is designed to sit flush with or below the surface of the material when installed.

🔩 Countersunk Allen Screw – DIN 7991 📌 Standard:
  • DIN 7991

  • Specifies hex socket countersunk head screws (also called socket flat head cap screws)

  • ISO equivalent: ISO 10642

Material & Finish:
  • Carbon steel (Grades 8.8, 10.9, 12.9)

  • Stainless steel (A2, A4 – for corrosion resistance)

  • Finishes: Zinc-plated, black oxide, plain, or passivated

Features & Benefits:
  • Flush finish for a smooth, snag-free surface

  • Strong torque transfer with internal hex drive

  • Ideal for precision assemblies, aerospace, automotive, machinery, and electronics

  • Common in high-strength or visually exposed applications

Yes! I am Interested

HEX Head Bolt Pointed

REQUEST CALLBACK

HEX Head Bolt Pointed
  • HEX Head Bolt Pointed
  • HEX Head Bolt Pointed
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1 / PieceGet Latest Price

Product Details:
Bolt DiameterM12 (12 mm)
Nominal Length12 mm
MaterialStainless Steel
FinishHot Dip Galvanized (HDG)
Country of OriginMade in India

A HEX head bolt with a pointed end, also known as a pointed hex bolt or pointed hex cap screw, is a threaded fastener that features a six-sided head for easy wrenching and a pointed tip at the end. The pointed end is designed for easy insertion into a material, often without the need for a pre-drilled pilot hole. 
Yes! I am Interested

HEX Head Bolt Bottom Slotted

REQUEST CALLBACK

HEX Head Bolt Bottom Slotted
  • HEX Head Bolt Bottom Slotted
  • HEX Head Bolt Bottom Slotted
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3 / PieceGet Latest Price

Product Details:
Bolt DiameterM10 (10 mm)
Nominal Length10 mm
MaterialStainless Steel
FinishHot Dip Galvanized (HDG)
Country of OriginMade in India

A bottom slotted hex head bolt is a fastener with a hexagonal head and a slot cut along its bottom surface, typically used with a nut or in a tapped hole. The slot is designed to accommodate a cotter pin, providing an additional locking mechanism to prevent the nut from loosening or spinning. 
Yes! I am Interested

Countersunk Phillips Self Tapping Screw

REQUEST CALLBACK

Countersunk Phillips Self Tapping Screw
  • Countersunk Phillips Self Tapping Screw
  • Countersunk Phillips Self Tapping Screw
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 0.8 / PieceGet Latest Price

Product Details:
MaterialStainless Steel
ColorGrey
Packaging Type100
Head TypeCountersunk
Usage/ApplicationIndustrial
Country of OriginMade in India

A Countersunk Phillips Self-Tapping Screw is a type of fastener designed for use in materials like metal, plastic, or wood, where it creates its own mating thread as it is driven in. Here's a breakdown of the terms:

Key Features:
  • Countersunk Head:

    • Designed to sit flush with or below the surface of the material once installed.

    • Typically conical with a flat top.

    • Ideal for applications where a smooth surface is needed after installation (e.g., furniture, metal fabrication).

  • Phillips Drive:

    • Cross-shaped recess.

    • Commonly used for better grip and torque transfer with power tools or manual screwdrivers.

    • Helps reduce cam-out (slipping out of the screw head) under high torque. 

A countersunk Phillips self-tapping screw is a type of fastener designed to be driven into a material, creating its own thread and sinking the head flush with the surface
Yes! I am Interested

Cross Ressesed Pan Head Tapping Screw

REQUEST CALLBACK

Cross Ressesed Pan Head Tapping Screw
  • Cross Ressesed Pan Head Tapping Screw
  • Cross Ressesed Pan Head Tapping Screw
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1.5 / PieceGet Latest Price

Product Details:
MaterialStainless Steel
Usage/ApplicationFitting
Head ShapeCross Ressesed Pan
Packet Contain100
ColorGrey
Country of OriginMade in India

Cross Recessed Pan Head Tapping Screw is a versatile fastener designed for applications where only one side of the workpiece is accessible. It features a pan-shaped head with a cross-recessed (Phillips) drive, allowing for secure installation using a standard screwdriver. These screws are particularly effective in materials like thin sheet metal, plastic, and resinous plywood

🔩 Key Specifications
  • Head Style: Pan head with a cross-recessed drive (Phillips)

  • Thread Type: Coarse thread (Form C)

  • Point Style: Cone point (Type C) for easy penetration without a pilot hole

  • Materials: Available in stainless steel (A2 and A4) and carbon steel

  • Surface Finishes: Options include zinc plating, black oxide, and passivation

  • Standards: Manufactured according to DIN 7981 and ISO 7049

Yes! I am Interested

Pan Head combi Screw

REQUEST CALLBACK

Pan Head combi Screw
  • Pan Head combi Screw
  • Pan Head combi Screw
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2 / PieceGet Latest Price

Product Details:
MaterialStainless Steel
Size3X12 cm
Usage/ApplicationFitting
Packaging Type100
Country of OriginMade in India

Pan head screws take their name from the appearance of their head, which looks similar to an upside-down frying pan. Pan head screws are a common head type of non-countersunk screw head used in wood screws, self-tapping screws, self-drilling screws, and machine screws.
Yes! I am Interested

PB Spring Washer

REQUEST CALLBACK

PB Spring Washer
  • PB Spring Washer
  • PB Spring Washer
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 8 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
Inner Diameter5 mm
Outer Diameter6 mm
Thickness1 mm
MaterialCopper
UsageFitting
BrandMaadhav Technocast Private Limited

PB Spring Washer typically refers to a Phosphor Bronze Spring Washer.

🔩 Phosphor Bronze (PB) Spring Washer 📌 Key Features:
  • Material: Phosphor bronze — an alloy of copper with tin and phosphorus, known for:

    • Excellent corrosion resistance

    • Good fatigue resistance and elasticity

    • Non-magnetic and non-sparking properties

  • Type: Usually a wave spring washer or helical spring washer designed to provide tension and prevent loosening in bolted assemblies

  • Finish: Often plain (natural bronze color) or lightly coated for corrosion protection

⚙️ Applications:
  • Electrical and electronic assemblies (due to excellent conductivity)

  • Marine and chemical environments where corrosion resistance is needed

  • Precision instruments and measuring devices

  • Aerospace and military equipment (non-magnetic requirements)

  • Vibrating machinery and dynamic loads

Yes! I am Interested

Spring Lock Washer

REQUEST CALLBACK

Spring Lock Washer
  • Spring Lock Washer
  • Spring Lock Washer
  • Spring Lock Washer
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
MaterialStainless Steel
Inner Diameter6 mm
Outer Diameter9 mm
Thickness0.8 mm
BrandNiranjan Trader
Material GradeSS304

Spring Lock Washer is a mechanical fastener designed to prevent loosening of a bolted joint due to vibration, dynamic loads, or thermal expansion. It's also commonly referred to as a split lock washer.

🔩 Spring Lock Washer (Split Type) 📌 Key Features:
  • Design: Helical (split ring) with a sharp edge that bites into the mating surfaces when compressed

  • Function: Maintains spring tension against the bolt/nut to reduce the risk of loosening

  • Material Options:

    • Steel (carbon, alloy)

    • Stainless steel (A2, A4)

    • Spring steel

    • Phosphor bronze, brass

  •  

Yes! I am Interested

Copper Split Pin

REQUEST CALLBACK

Copper Split Pin
  • Copper Split Pin
  • Copper Split Pin
  • Copper Split Pin
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
MaterialCopper
Size3 mm
ColorGolden
Packaging Size1x100 Piece
Pin TypeSplit
Packaging TypeHDPE Bag
Surface FinishingPolished

A Copper Split Pin (also known as a cotter pin) is a simple, yet effective mechanical fastener used to secure nuts, bolts, clevis pins, or other assemblies. It is inserted through a drilled hole and then bent apart to prevent removal.

🔩 Copper Split Pin (Cotter Pin) 📌 Key Features:
  • Material:

    • Copper – chosen for its corrosion resistance, non-magnetic properties, electrical conductivity, and softness (easy to bend)

    • Also available in brass, stainless steel, mild steel

  • Design:

    • Two tines (legs) connected at the head, forming a loop at one end

    • Legs are bent apart after insertion to lock the pin in place

  • Reusable: Typically not—designed for single use

Yes! I am Interested

Hex Nylock Nut Din 982

REQUEST CALLBACK

Hex Nylock Nut Din 982
  • Hex Nylock Nut Din 982
  • Hex Nylock Nut Din 982
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 5 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
MaterialStainless Steel
Nominal Nut DiameterM3 (3 mm)
Material GradeSS304
FeaturesStrong
BrandNiranjan Traders
Pack TypeHDPE Bag

Hex Nylock Nut (also called a nylon insert lock nut) is a hexagonal nut with a nylon ring insert inside one end. This nylon ring creates friction on the mating threads, preventing the nut from loosening under vibration or torque.

🔩 Hex Nylock Nut 📌 Key Features:
  • Shape: Standard hex nut shape for wrench or socket tightening

  • Locking Mechanism: Nylon insert (usually a blue or white ring) that grips the bolt threads

  • Material:

    • Usually made from carbon steel, stainless steel, or alloy steel

    • Nylon insert is a durable, heat-resistant polymer

  • Finish: Zinc-plated, plain steel, stainless natural, or other coatings

  • Thread Types: Metric (M3 to M24) and imperial (UNC/UNF)

Yes! I am Interested

Csk Philips Head Screw Din 965

REQUEST CALLBACK

Csk Philips Head Screw Din 965
  • Csk Philips Head Screw Din 965
  • Csk Philips Head Screw Din 965
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 5 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
Diameter4 mm
MaterialStainless Steel
Size0.5incn
Head ShapeFlat Head, Round, Slotted
Packaging TypeHDPE Bag
FinishingPolished
ColorSilver
Surface TreatmentZinc Plated, Black Oxide
GradeSS304

A CSK Phillips Head Screw DIN 965 is a countersunk head machine screw with a cross recess (Phillips) drive, designed for flush fitting into a countersunk hole. It conforms to DIN 965, a widely used standard for metric screws.

🔩 Countersunk Phillips Head Screw – DIN 965 📌 Standard:
  • DIN 965

  • Specifies countersunk head screws with Phillips (cross-recessed) drive

  • ISO equivalent: ISO 7046 (DIN 965 is now mostly replaced by this ISO)

📐 Typical Dimensions (DIN 965, Metric Examples)
Thread Size (d)Head Diameter (dk)Head Height (k)Recess TypeDrive Size
M3 5.6 mm 1.65 mm Phillips PH1
M4 7.5 mm 2.2 mm Phillips PH2
M5 9.2 mm 2.5 mm Phillips PH2
M6 11.0 mm 3.0 mm Phillips PH3
M8 14.5 mm 4.0 mm Phillips PH4

These screws are designed to sit flush with the surface when properly countersunk.

🧱 Material & Finish:
  • Carbon steel (Class 4.8, 8.8, etc.)

  • Stainless steel (A2, A4)

  • Brass, nylon, or other materials (special applications)

  • Finishes: Zinc plated, black oxide, plain, passivated (for stainless)

Features & Benefits:
  • Flush surface finish for safety and aesthetics

  • Phillips drive provides centered torque, good for powered installation

  • Used with tapped holes or nuts in metal or plastic

  • Available in coarse (standard) or fine pitch threads

Yes! I am Interested

Pan Phillips Head Machine Screw

REQUEST CALLBACK

Pan Phillips Head Machine Screw
  • Pan Phillips Head Machine Screw
  • Pan Phillips Head Machine Screw
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
MaterialStainless Steel
Size5-20MM
GradeSS304
Usage/ApplicationIndustrial
BrandNiranjan Traders
Pack TypeHDPE Bag

Pan Phillips Head Machine Screw is a type of machine screw with a rounded (pan-shaped) head and a cross-recessed (Phillips) drive. It’s commonly used in applications where a clean, slightly raised finish is acceptable and precise fastening into tapped holes or nuts is required.

🔩 Pan Head Phillips Machine Screw 📌 Key Features:
  • Head Shape: Pan head — rounded top with flat bearing surface underneath

  • Drive Type: Phillips cross-recess (can also be Pozidriv or other variants)

  • Thread: Machine threads (metric or UNC/UNF), typically fully threaded

  • Material Options:

    • Steel (plain, zinc plated, black oxide)

    • Stainless steel (A2-70, A4-80)

    • Brass or nylon (for electrical or non-corrosive applications)

  •  

Yes! I am Interested

Hex Lock Nut Din 439

REQUEST CALLBACK

Hex Lock Nut Din 439
  • Hex Lock Nut Din 439
  • Hex Lock Nut Din 439
  • Hex Lock Nut Din 439
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1.80 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
Nominal Nut DiameterM3.5 (3.5 mm)
MaterialStainless Steel
Material GradeSS304
Usage/ApplicationFitting
Quantity Per Pack100
Packaging Size1x100 Piece
Surface TreatmentHot Rolled
Is It CustomisedNon Customisation

The Hex Lock Nut DIN 439 is a low-profile hexagonal nut, often referred to as a "jam nut". It's used to lock standard nuts in place or where a full-height nut isn't necessary.

🔩 DIN 439 – Hex Lock Nut (Low Profile / Jam Nut) 📌 Key Features:
  • Shape: Hexagonal (6-sided)

  • Thread: Metric (typically coarse thread)

  • Standard: DIN 439 (superseded in part by ISO 4035 and ISO 4036)

  • Variants:

    • DIN 439 Part 1 (Type A): With chamfered edges

    • DIN 439 Part 2 (Type B): Without chamfer (now mostly replaced by ISO 4035)

  • Material Options:

    • Steel grades: Class 04, 05, 8

    • Stainless steel: A2, A4

    • Brass, others

  • Surface Finishes: Zinc-plated, black oxide, plain, etc.

Yes! I am Interested

Hex Nut Din 934

REQUEST CALLBACK

Hex Nut Din 934
  • Hex Nut Din 934
  • Hex Nut Din 934
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
Nominal Nut DiameterM5 (5 mm)
MaterialStainless Steel
Material GradeSS304
Usage/ApplicationFitting
Quantity Per Pack100 Piece
Packaging Size1x100 Piece
Surface TreatmentHot Rolled
Is It CustomisedNon Customisation

Hex Nut DIN 934 is a standard metric hexagonal nut, commonly used in conjunction with bolts, screws, and threaded rods for general-purpose fastening.

🔩 DIN 934 – Hex Nut 📌 Key Features:
  • Shape: Hexagonal (6-sided)

  • Thread Type: Metric coarse thread (standard), available in fine thread versions

  • Standard: DIN 934 (equivalent to ISO 4032)

  • Material Options:

    • Carbon Steel: Grade 6, 8, 10

    • Stainless Steel: A2 (304), A4 (316)

    • Brass, nylon insert variants (though nylon-inserted nuts follow DIN 985)

  • Finish Options: Zinc-plated, black oxide, hot-dip galvanized, plain

Yes! I am Interested

Bottom Sloted Hex Head Bolt

REQUEST CALLBACK

Bottom Sloted Hex Head Bolt
  • Bottom Sloted Hex Head Bolt
  • Bottom Sloted Hex Head Bolt
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 8 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
Bolt DiameterM8 (8 mm)
MaterialStainless Steel
FinishElectro Galvanized (EG)
Tensile StrengthStrong
Pack TypeHDPE Bag
Nominal Length10 mm

Bottom Slotted Hex Head Bolt is a type of bolt featuring a standard hexagonal head with a slot machined on the underside (bottom) of the head. This slot is typically used for specific assembly or locking purposes, such as allowing a locking tab or wire to engage, preventing rotation or loosening.

🔩 Bottom Slotted Hex Head Bolt 📌 Key Features:
  • Head Type: Hexagonal head with a slot on the underside (bottom) of the head

  • Threading: Fully or partially threaded (depending on length and application)

  • Material:

    • Carbon steel (grades 4.6, 8.8, 10.9, etc.)

    • Stainless steel (A2, A4)

    • Other alloys depending on application

  • Finish: Zinc-plated, black oxide, galvanized, plain stainless

  • Common Standards: Usually custom or specialized bolts, sometimes made to order or per specific industrial standards (not common in standard DIN/ISO catalogs)

Yes! I am Interested

Hex Head Bolt Pointed

REQUEST CALLBACK

Hex Head Bolt Pointed
  • Hex Head Bolt Pointed
  • Hex Head Bolt Pointed
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 8 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
Bolt DiameterM8 (8 mm)
MaterialStainless Steel
FinishElectro Galvanized (EG)
Material GradeSS304
Pack TypeHDPE Bag
Nominal Length10 mm

Hex Head Bolt Pointed is a hexagonal head bolt where the tip of the threaded end is shaped to a point instead of a flat or chamfered end. This pointed tip helps in alignment, easy insertion, or piercing soft materials during assembly.

🔩 Hex Head Bolt with Pointed Tip 📌 Key Features:
  • Head Type: Standard hexagonal head for wrench or socket tightening

  • Tip: Threaded end tapers to a sharp or rounded point rather than a flat cut

  • Threading: Fully or partially threaded

  • Material:

    • Carbon steel (various strength grades)

    • Stainless steel (A2, A4)

    • Alloy steels as needed

Yes! I am Interested

10x25mm Flat Head M With Hole

REQUEST CALLBACK

10x25mm Flat Head M With Hole
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2 / PieceGet Latest Price

Product Details:
Head TypeHead PIN
Head ShapeFlat
MaterialStainless Steel
Quantity Per Pack100
ColorGrey
Country of OriginMade in India

A flat head M10x25 screw with a hole is a fastener with a flat, countersunk head, a thread size of M10 (metric 10mm), a length of 25mm, and a hole drilled through the screw head. It's commonly used when a flat head is needed for a flush or flush-with-the-surface finish, and the hole in the head allows for additional function or attachment. 
Yes! I am Interested

Hex Head Bolt Half Thread Din 931

REQUEST CALLBACK

Hex Head Bolt Half Thread Din 931
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
Bolt DiameterM14 (14 mm)
Nominal Length25 mm
MaterialStainless Steel
FinishHot Dip Galvanized (HDG)
Pack TypeHDPE Bag
Upper ShapeHex

Hex Head Bolt DIN 931 is a partially threaded bolt with a hexagonal head, commonly used where shear strength is important or alignment is aided by the unthreaded shank. It's often used in mechanical, structural, and automotive applications.

🔩 DIN 931 – Hex Head Bolt (Partially Threaded) 📌 Key Features:
  • Head Type: Hexagon (external)

  • Threading: Partial thread (typically thread length = 2 × diameter + 6 mm for bolts up to 125 mm long)

  • Standard: DIN 931 (equivalent to ISO 4014)

  • Materials:

    • Carbon Steel: Grades 4.6, 8.8, 10.9, 12.9

    • Stainless Steel: A2 (304), A4 (316)

    • Other: Brass, titanium

  • Finishes: Zinc-plated, hot-dip galvanized, black oxide, plain

Yes! I am Interested

Hex Head Screw Din 933

REQUEST CALLBACK

Hex Head Screw Din 933
  • Hex Head Screw Din 933
  • Hex Head Screw Din 933
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1.5 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
Quantity Per Pack1x100 Piece
Packaging TypeHDPE Bag
Thread TypeFully Thread
Surface FinishingPolished
ColorSilver
Rust ResistantYes
MaterialStainless Steel

The Hex Head Screw DIN 933 is a widely used metric fastener known for its full thread and external hexagonal head. It's often used in construction, automotive, mechanical, and general-purpose applications.

🔩 DIN 933 – Hexagon Head Screw (Fully Threaded) 📌 Key Features:
  • Head Type: Hexagonal (external hex)

  • Thread: Fully threaded along the entire length

  • Standard: DIN 933 (equivalent to ISO 4017)

  • Material Options:

    • Steel: Grades 4.6, 8.8, 10.9, 12.9

    • Stainless Steel: A2, A4

    • Brass, titanium, etc.

  • Surface Finishes: Zinc-plated, hot-dip galvanized, black oxide, plain, etc.

  • Drive Method: Spanner/wrench (external hex head)

Yes! I am Interested

10X35 Round Head Rivet M With Hole

REQUEST CALLBACK

10X35 Round Head Rivet M  With Hole
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 300 / KgGet Latest Price

Product Details:
MaterialStainless Steel
Quantity Per Pack100
ColorGrey
Head ShapeFlat
Usage/ApplicationIndustrial
Country of OriginMade in India

A Round Head Rivet M10x35 With Hole is a fastener that utilizes a round head design with a hole for enhanced fastening options. It's a robust solution for creating strong and secure connections, especially in applications requiring a more finished look and extra versatility. 
Yes! I am Interested

APL Antitheft Bolt and Break Away Security Nut

REQUEST CALLBACK

APL Antitheft Bolt and Break Away Security Nut
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 25 / PieceGet Latest Price

Product Details:
MaterialStainless Steel
Diameter10 mm
BrandAPL
ColourGrey
Country of OriginMade in India

APL (Amit Fasteners) manufactures stainless steel fasteners, including bolts, nuts, screws, and washers. While specific details about their Antitheft Bolt are limited, APL's products are known for their durability and resistance to corrosion, making them suitable for applications where security is a concern

🔐 Break Away Security Nut

Break Away Security Nuts, also known as shear nuts or tamper-proof nuts, are designed to provide a permanent, tamper-resistant fastening solution. These nuts feature a hexagonal head that shears off when tightened to a specific torque, leaving behind a conical base that is extremely difficult to remove without specialized tools

Key Features:

  • Material Options: Available in stainless steel 304, ZAMAC 5 zinc alloy, and aluminum. 

  • Installation: Can be installed using standard spanners or sockets

  • Applications: Commonly used in public infrastructure, automotive industries, and areas requiring high-security fastening.

Yes! I am Interested

Both Side Threaded Stud

REQUEST CALLBACK

Both Side Threaded Stud
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3 / PieceGet Latest Price

Product Details:
MaterialStainless Steel
Usage/ApplicationIndustrial
Quantity Per Pack100
ColorGrey
Country of OriginMade in India

A double-ended threaded stud, also known as a double-end threaded rod or a tap-end stud, is a fastener with threads on both ends of a cylindrical body. The threads are typically equal in length on both sides, but can also have differing thread lengths. The unthreaded portion of the stud's body allows for engagement with two separate components, facilitating secure fastening. 
Yes! I am Interested

10x25mm Flat Head Pin With Hole

REQUEST CALLBACK

10x25mm Flat Head Pin With Hole
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 5 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
MaterialStainless Steel
Packaging TypeHDPE Bag
Size10x25mm
ColorSilver
Packaging Size1x100 Piece
Usage/ApplicationFitting

10x25mm Flat Head Pin with Hole is a cylindrical metal pin used for precise locating, fastening, or alignment purposes. The flat head provides a flush or low-profile finish on one end, while the hole near the opposite end is usually for securing the pin with a split pin, wire, or cotter pin to prevent axial movement.

🔩 10x25mm Flat Head Pin with Hole 📌 Specification:
  • Diameter: 10 mm

  • Length: 25 mm (overall length excluding or including the head, check with manufacturer)

  • Head Type: Flat head (low profile, designed to sit flush or slightly proud of the surface)

  • Hole: Typically a small drilled hole near the non-head end for securing with a cotter pin or wire

  • Material:

    • Steel (often hardened or case hardened)

    • Stainless steel (A2, A4) for corrosion resistance

    • Other materials (brass, alloy steel) available depending on application

  • Finish: Plain, zinc-plated, black oxide, or stainless steel natural finish

Yes! I am Interested

Stainless Steel U Bolt

REQUEST CALLBACK

Stainless Steel U Bolt
  • Stainless Steel U Bolt
  • Stainless Steel U Bolt
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10 / PieceGet Latest Price

Product Details:
Minimum Order Quantity100 Piece
Diameter10 mm
Material GradeSS394
ShapeU
BrandNiranjan Trader

Stainless Steel U-Bolt is a U-shaped fastener with threaded ends, used primarily to clamp or secure pipes, tubes, or round objects to a surface or frame. Thanks to stainless steel, it's highly resistant to corrosion, making it ideal for marine, chemical, or outdoor applications.

🔩 Stainless Steel U-Bolt 📌 Key Features:
  • Shape: "U" with machine threads on both ends

  • Material:

    • Stainless Steel A2 (304): General corrosion resistance

    • Stainless Steel A4 (316): High resistance to saltwater, acids – suitable for marine or chemical environments

  • Finish: Polished, passivated, or plain (depending on application)

  • Threads: Typically metric (M6, M8, M10, etc.) or UNC (imperial)

Yes! I am Interested

Hexagon Socket Head Cap Screw Din912

REQUEST CALLBACK

Hexagon Socket Head Cap Screw Din912
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
MaterialSteel
Thread TypeFull Thread
Head Height0.5 Inch
CodeDIN912
ShapeHexagon

Hexagon Socket Head Cap Screw DIN 912 is a standardized fastener, commonly used in machinery, automotive, and construction due to its high strength and compact head design. Here's a quick overview:

🔩 DIN 912 – Hexagon Socket Head Cap Screw 📌 Key Features:
  • Head Type: Cylindrical head with internal hexagon (Allen drive)

  • Standard: DIN 912 (equivalent to ISO 4762)

  • Material: Often made from steel (grades like 8.8, 10.9, 12.9), stainless steel (A2, A4), titanium, brass, etc.

  • Finish: Plain, zinc-plated, black oxide, hot-dip galvanized, etc.

  • Drive Type: Hex socket (Allen key)

  • Thread Type: Metric coarse (most common), but can also be fine thread

Yes! I am Interested

Hex Flange Nut DIN 6923

REQUEST CALLBACK

Hex Flange Nut DIN 6923
  • Hex Flange Nut DIN 6923
  • Hex Flange Nut DIN 6923
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1000 Piece
MaterialStainless Steel
Nominal Nut DiameterM3.5 (3.5 mm)
Material GradeSS304
BrandNiranjan Traders

Hex Flange Nut DIN 6923 is a hexagonal nut with an integrated flanged base that acts like a built-in washer. This design distributes the clamping load over a larger area, improving load-bearing and reducing the chance of damaging the surface under the nut.

Hex Flange Nut – DIN 6923 �� Standard:
  • DIN 6923

  • Replaced in part by ISO 4161, but still widely used in industry

Key Features:
  • Flanged base distributes load without needing a washer

  • Can include serrations under the flange (for locking action, often called serrated flange nuts)

  • Reduces chance of the nut loosening under vibration

  • Compatible with standard bolts or threaded studs


Yes! I am Interested

HEX Head Bolt With Hole

REQUEST CALLBACK

HEX Head Bolt With Hole
  • HEX Head Bolt With Hole
  • HEX Head Bolt With Hole
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2 / PieceGet Latest Price

Product Details:
Bolt DiameterM12 (12 mm)
Nominal Length12 mm
MaterialStainless Steel
FinishHot Dip Galvanized (HDG)
Country of OriginMade in India

A Hex Head Bolt with Hole is a fastener with a six-sided head and a hole drilled through it. This hole is typically used for securing the bolt with a pin, wire, or other locking device, preventing loosening due to vibration or rotation. It's a versatile fastener used in various applications like machinery, equipment, and construction. 
Yes! I am Interested

Head Socket Set Screw Cone Point

REQUEST CALLBACK

Head Socket Set Screw Cone Point
  • Head Socket Set Screw Cone Point
  • Head Socket Set Screw Cone Point
  • Head Socket Set Screw Cone Point
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3 / PieceGet Latest Price

Product Details:
Thread TypeFull Thread
MaterialStainless Steel
Head Height5mm
ColorGrey
Country of OriginMade in India

A cone point socket set screw is a fastener that features a conical point at the tip and a socket-head design. The conical point is designed to penetrate and grip the surface it is pressed against, while the socket head allows for easy tightening with a wrench. These screws are commonly used for securing parts together, especially when a strong hold and permanent fixation are required
Yes! I am Interested

Pan Head Self Drilling Screw

REQUEST CALLBACK

Pan Head Self Drilling Screw
  • Pan Head Self Drilling Screw
  • Pan Head Self Drilling Screw
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2 / PieceGet Latest Price

Product Details:
MaterialStainless Steel
Usage/ApplicationIndustrial
Type Of HeadsRound-head
PlatingGrey
Country of OriginMade in India

A pan head self-drilling screw is a fastener with a rounded head that is relatively flat on top and on the bottom. It has a built-in drill point at the end, allowing it to drill and tap its own threads into the material it's being fastened to, eliminating the need for a pre-drilled pilot hole. 
Yes! I am Interested

Slotted CSK Head Screws

REQUEST CALLBACK

Slotted CSK Head Screws
  • Slotted CSK Head Screws
  • Slotted CSK Head Screws
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 4 / PieceGet Latest Price

Product Details:
MaterialStainless Steel
Quantity per pack100
ColorGrey
UsagesIndustrial
Country of OriginMade in India

Slotted CSK (Countersunk) head screws are screws with a flat head that sits flush with the surface, typically used in precision engineering and for fastening machine components, tools, and electronic parts. They are also known as flat-head screws. The head has a slot for a flat-blade screwdriver. 
Yes! I am Interested

Pan Combi Head Built in Washer Screw

REQUEST CALLBACK

Pan Combi Head Built in Washer Screw
  • Pan Combi Head Built in Washer Screw
  • Pan Combi Head Built in Washer Screw
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2.5 / PieceGet Latest Price

Product Details:
Head TypePan Combi
MaterialStainless Steel
Quantity Per Pack100
ColorGrey
Country of OriginMade in India

A pan combi head screw with a built-in washer is a fastener that combines a flat, rounded head with a Phillips or slotted drive, and a washer integrated into the head. This combination provides a secure and robust fastening solution with additional protection against damage and uneven load distribution. 
Yes! I am Interested

Slotted Csk Self Tapping Screws

REQUEST CALLBACK

Slotted Csk Self Tapping Screws
  • Slotted Csk Self Tapping Screws
  • Slotted Csk Self Tapping Screws
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3 / PieceGet Latest Price

Product Details:
MaterialStainless Steel
ColorGrey
Packaging Type100
Head TypeSlotted CSK
Usage/ApplicationIndustrial
Country of OriginMade in India

A slotted CSK (Countersunk) self-tapping screw is a type of fastener designed to create its own thread in a material like metal, plastic, or wood, while providing a flush surface
Yes! I am Interested

Slotted Round Head Screw

REQUEST CALLBACK

Slotted Round Head Screw
  • Slotted Round Head Screw
  • Slotted Round Head Screw
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1.5 / PieceGet Latest Price

Product Details:
MaterialStainless Steel
Quantity Per Pack100
Usage/ApplicationIndustrial
ColorGrey
Country of OriginMade in India

A slotted round head screw is a threaded fastener with a rounded head and a slot for a flathead screwdriver. These screws are commonly used for applications where a smooth, non-countersunk surface is desired, and are often found in industries like woodworking, construction, and electronics. 
Yes! I am Interested

View More

X


Explore More Products

Contact via E-mail
Contact via SMS
Vishwanath Amar Puri (CEO)
Niranjan Traders
Survey No.97, Bldg M21, Flat 547, Vishalshri Co-Op.Hsg. Soc, Gokhale Nagar, Shivaji Nagar,Krishi Mahavidyalaya
Pune - 411005, Maharashtra, India
Call Us: 
Call Response Rate: 62%
Share Us :



Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us

© Niranjan Traders. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Niranjan Traders