SS Hardware & Fasteners

Approx. Rs 3 / PieceGet Latest Price

Product Details:

A flat point socket set screw is a headless fastener with a flat tip that is used for applications where minimal damage to the mating surface is desired, or where frequent re-setting and relocation are needed. The flat point sits against a surface, creating a clamping force when tightened, without digging in or causing damage. 

Approx. Rs 4 / PieceGet Latest Price

Product Details:

A Hex Head SEMS screw is a type of fastener that combines a hexagon-shaped screw with a permanently attached washer or washers. The "SEMS" part refers to "Screw with Pre-assembled washer," meaning the washer is pre-installed and remains attached to the screw head. This design simplifies assembly by eliminating the need for separate washers and reducing the risk of washer loss or omission

Approx. Rs 2 / PieceGet Latest Price

Product Details:

A PAN Phillips SEMS screw is a type of fastener that combines a standard pan head screw with a captive washer, also known as a Sems assembly. The "PAN" refers to the flat, wide head of the screw, while "Phillips" indicates the head's drive type (cross-shaped recess for a Phillips screwdriver). The "SEMS" portion indicates the pre-assembled washer, which is designed to be held securely in place by the screw. 

Approx. Rs 8 / PieceGet Latest Price

Product Details:

Threaded Stud Both Side (often called a double-ended stud or double-ended threaded rod) is a fastener that has threads on both ends with an unthreaded or partially threaded shank in the middle. It is designed to be screwed into a tapped hole on one end, while the other end accepts a nut or another fastener.

🔩 Threaded Stud Both Side 📌 Key Features:

• Threading: Threads on both ends, typically with the same thread size and pitch

• Middle section:

  • Can be fully threaded or have an unthreaded plain shank in the center

  • Length of plain shank varies depending on design

• Material:

  • Carbon steel (various grades)

  • Stainless steel (A2, A4)

  • Alloy steel or special materials as needed

• Finish: Plain, zinc plated, galvanized, black oxide, stainless natural, etc.

•  

Approx. Rs 3 / PieceGet Latest Price

Product Details:

Stainless Steel Wing Nut is a type of nut with two large metal "wings" on either side, allowing it to be tightened or loosened by hand without tools. It’s ideal for applications that require frequent assembly and disassembly.

🔩 SS Wing Nut (Stainless Steel) 📌 Key Features:

• Shape: Hexagonal body with two wing-like extensions

• Material:

  • Stainless Steel A2 (304): Good corrosion resistance for general use

  • Stainless Steel A4 (316): Superior corrosion resistance, ideal for marine, food, and chemical environments

• Thread Types: Metric (M3–M20) and UNC/UNF (imperial)

• Standard References:

  • DIN 315 – Common standard for wing nuts

  • ISO and ANSI equivalents also exist

Approx. Rs 1 / PieceGet Latest Price

Product Details:

Dome Nut DIN 1587—also known as an acorn nut—is a hexagonal nut with a closed, domed top that covers the exposed bolt threads. It’s used for safety, aesthetic appearance, and to protect threads from damage, dirt, or corrosion.

🔩 Dome Nut – DIN 1587 📌 Standard:

• DIN 1587

• Specifies hexagonal nuts with a domed cap on one side

• ISO equivalent: ISO 4032 + cap geometry (non-identical)

📐 Key Dimensions (DIN 1587 – Metric Examples)

Approx. Rs 2 / PieceGet Latest Price

Product Details:

Hex Head Bolt with Hole is a standard hex head bolt that features a cross-drilled hole through the threaded shaft near the bolt’s end. This hole allows the bolt to be secured with a cotter pin, safety wire, or split pin to prevent it from loosening due to vibration or rotation.

🔩 Hex Head Bolt with Hole 📌 Key Features:

• Head Type: Standard hexagonal head for wrench or socket tightening

• Hole:

  • Drilled transversely through the bolt shank near the threaded end

  • Diameter and position depend on bolt size and standards

• Threading: Fully or partially threaded depending on bolt length

• Material:

  • Carbon steel (various strength grades like 8.8, 10.9)

  • Stainless steel (A2, A4)

  • Other alloys as needed

•  

Approx. Rs 1 / PieceGet Latest Price

Product Details:

A CSK Allen Screw DIN 7991 is a countersunk socket head cap screw, meaning it has a flat (countersunk) head and is driven with a hex (Allen) key. It is designed to sit flush with or below the surface of the material when installed.

🔩 Countersunk Allen Screw – DIN 7991 📌 Standard:

• DIN 7991

• Specifies hex socket countersunk head screws (also called socket flat head cap screws)

• ISO equivalent: ISO 10642

Material & Finish:

• Carbon steel (Grades 8.8, 10.9, 12.9)

• Stainless steel (A2, A4 – for corrosion resistance)

• Finishes: Zinc-plated, black oxide, plain, or passivated

✅ Features & Benefits:

• Flush finish for a smooth, snag-free surface

• Strong torque transfer with internal hex drive

• Ideal for precision assemblies, aerospace, automotive, machinery, and electronics

• Common in high-strength or visually exposed applications

Approx. Rs 1 / PieceGet Latest Price

Product Details:

A HEX head bolt with a pointed end, also known as a pointed hex bolt or pointed hex cap screw, is a threaded fastener that features a six-sided head for easy wrenching and a pointed tip at the end. The pointed end is designed for easy insertion into a material, often without the need for a pre-drilled pilot hole. 

Approx. Rs 3 / PieceGet Latest Price

Product Details:

A bottom slotted hex head bolt is a fastener with a hexagonal head and a slot cut along its bottom surface, typically used with a nut or in a tapped hole. The slot is designed to accommodate a cotter pin, providing an additional locking mechanism to prevent the nut from loosening or spinning. 

Approx. Rs 0.8 / PieceGet Latest Price

Product Details:

A Countersunk Phillips Self-Tapping Screw is a type of fastener designed for use in materials like metal, plastic, or wood, where it creates its own mating thread as it is driven in. Here's a breakdown of the terms:

Key Features:

• Countersunk Head:

  • Designed to sit flush with or below the surface of the material once installed.

  • Typically conical with a flat top.

  • Ideal for applications where a smooth surface is needed after installation (e.g., furniture, metal fabrication).

• Phillips Drive:

  • Cross-shaped recess.

  • Commonly used for better grip and torque transfer with power tools or manual screwdrivers.

  • Helps reduce cam-out (slipping out of the screw head) under high torque. 

A countersunk Phillips self-tapping screw is a type of fastener designed to be driven into a material, creating its own thread and sinking the head flush with the surface

Approx. Rs 1.5 / PieceGet Latest Price

Product Details:

Cross Recessed Pan Head Tapping Screw is a versatile fastener designed for applications where only one side of the workpiece is accessible. It features a pan-shaped head with a cross-recessed (Phillips) drive, allowing for secure installation using a standard screwdriver. These screws are particularly effective in materials like thin sheet metal, plastic, and resinous plywood

🔩 Key Specifications

• Head Style: Pan head with a cross-recessed drive (Phillips)

• Thread Type: Coarse thread (Form C)

• Point Style: Cone point (Type C) for easy penetration without a pilot hole

• Materials: Available in stainless steel (A2 and A4) and carbon steel

• Surface Finishes: Options include zinc plating, black oxide, and passivation

• Standards: Manufactured according to DIN 7981 and ISO 7049

Approx. Rs 2 / PieceGet Latest Price

Product Details:

Pan head screws take their name from the appearance of their head, which looks similar to an upside-down frying pan. Pan head screws are a common head type of non-countersunk screw head used in wood screws, self-tapping screws, self-drilling screws, and machine screws.

Approx. Rs 8 / PieceGet Latest Price

Product Details:

PB Spring Washer typically refers to a Phosphor Bronze Spring Washer.

🔩 Phosphor Bronze (PB) Spring Washer 📌 Key Features:

• Material: Phosphor bronze — an alloy of copper with tin and phosphorus, known for:

  • Excellent corrosion resistance

  • Good fatigue resistance and elasticity

  • Non-magnetic and non-sparking properties

• Type: Usually a wave spring washer or helical spring washer designed to provide tension and prevent loosening in bolted assemblies

• Finish: Often plain (natural bronze color) or lightly coated for corrosion protection

⚙️ Applications:

• Electrical and electronic assemblies (due to excellent conductivity)

• Marine and chemical environments where corrosion resistance is needed

• Precision instruments and measuring devices

• Aerospace and military equipment (non-magnetic requirements)

• Vibrating machinery and dynamic loads

Approx. Rs 3 / PieceGet Latest Price

Product Details:

Spring Lock Washer is a mechanical fastener designed to prevent loosening of a bolted joint due to vibration, dynamic loads, or thermal expansion. It's also commonly referred to as a split lock washer.

🔩 Spring Lock Washer (Split Type) 📌 Key Features:

• Design: Helical (split ring) with a sharp edge that bites into the mating surfaces when compressed

• Function: Maintains spring tension against the bolt/nut to reduce the risk of loosening

• Material Options:

  • Steel (carbon, alloy)

  • Stainless steel (A2, A4)

  • Spring steel

  • Phosphor bronze, brass

•  

Approx. Rs 3 / PieceGet Latest Price

Product Details:

A Copper Split Pin (also known as a cotter pin) is a simple, yet effective mechanical fastener used to secure nuts, bolts, clevis pins, or other assemblies. It is inserted through a drilled hole and then bent apart to prevent removal.

🔩 Copper Split Pin (Cotter Pin) 📌 Key Features:

• Material:

  • Copper – chosen for its corrosion resistance, non-magnetic properties, electrical conductivity, and softness (easy to bend)

  • Also available in brass, stainless steel, mild steel

• Design:

  • Two tines (legs) connected at the head, forming a loop at one end

  • Legs are bent apart after insertion to lock the pin in place

• Reusable: Typically not—designed for single use

Approx. Rs 5 / PieceGet Latest Price

Product Details:

Hex Nylock Nut (also called a nylon insert lock nut) is a hexagonal nut with a nylon ring insert inside one end. This nylon ring creates friction on the mating threads, preventing the nut from loosening under vibration or torque.

🔩 Hex Nylock Nut 📌 Key Features:

• Shape: Standard hex nut shape for wrench or socket tightening

• Locking Mechanism: Nylon insert (usually a blue or white ring) that grips the bolt threads

• Material:

  • Usually made from carbon steel, stainless steel, or alloy steel

  • Nylon insert is a durable, heat-resistant polymer

• Finish: Zinc-plated, plain steel, stainless natural, or other coatings

• Thread Types: Metric (M3 to M24) and imperial (UNC/UNF)

Approx. Rs 5 / PieceGet Latest Price

Product Details:

A CSK Phillips Head Screw DIN 965 is a countersunk head machine screw with a cross recess (Phillips) drive, designed for flush fitting into a countersunk hole. It conforms to DIN 965, a widely used standard for metric screws.

🔩 Countersunk Phillips Head Screw – DIN 965 📌 Standard:

• DIN 965

• Specifies countersunk head screws with Phillips (cross-recessed) drive

• ISO equivalent: ISO 7046 (DIN 965 is now mostly replaced by this ISO)

📐 Typical Dimensions (DIN 965, Metric Examples)

These screws are designed to sit flush with the surface when properly countersunk.

🧱 Material & Finish:

• Carbon steel (Class 4.8, 8.8, etc.)

• Stainless steel (A2, A4)

• Brass, nylon, or other materials (special applications)

• Finishes: Zinc plated, black oxide, plain, passivated (for stainless)

✅ Features & Benefits:

• Flush surface finish for safety and aesthetics

• Phillips drive provides centered torque, good for powered installation

• Used with tapped holes or nuts in metal or plastic

• Available in coarse (standard) or fine pitch threads

Approx. Rs 1 / PieceGet Latest Price

Product Details:

Pan Phillips Head Machine Screw is a type of machine screw with a rounded (pan-shaped) head and a cross-recessed (Phillips) drive. It’s commonly used in applications where a clean, slightly raised finish is acceptable and precise fastening into tapped holes or nuts is required.

🔩 Pan Head Phillips Machine Screw 📌 Key Features:

• Head Shape: Pan head — rounded top with flat bearing surface underneath

• Drive Type: Phillips cross-recess (can also be Pozidriv or other variants)

• Thread: Machine threads (metric or UNC/UNF), typically fully threaded

• Material Options:

  • Steel (plain, zinc plated, black oxide)

  • Stainless steel (A2-70, A4-80)

  • Brass or nylon (for electrical or non-corrosive applications)

•  

Approx. Rs 1.80 / PieceGet Latest Price

Product Details:

The Hex Lock Nut DIN 439 is a low-profile hexagonal nut, often referred to as a "jam nut". It's used to lock standard nuts in place or where a full-height nut isn't necessary.

🔩 DIN 439 – Hex Lock Nut (Low Profile / Jam Nut) 📌 Key Features:

• Shape: Hexagonal (6-sided)

• Thread: Metric (typically coarse thread)

• Standard: DIN 439 (superseded in part by ISO 4035 and ISO 4036)

• Variants:

  • DIN 439 Part 1 (Type A): With chamfered edges

  • DIN 439 Part 2 (Type B): Without chamfer (now mostly replaced by ISO 4035)

• Material Options:

  • Steel grades: Class 04, 05, 8

  • Stainless steel: A2, A4

  • Brass, others

• Surface Finishes: Zinc-plated, black oxide, plain, etc.

Approx. Rs 1 / PieceGet Latest Price

Product Details:

Hex Nut DIN 934 is a standard metric hexagonal nut, commonly used in conjunction with bolts, screws, and threaded rods for general-purpose fastening.

🔩 DIN 934 – Hex Nut 📌 Key Features:

• Shape: Hexagonal (6-sided)

• Thread Type: Metric coarse thread (standard), available in fine thread versions

• Standard: DIN 934 (equivalent to ISO 4032)

• Material Options:

  • Carbon Steel: Grade 6, 8, 10

  • Stainless Steel: A2 (304), A4 (316)

  • Brass, nylon insert variants (though nylon-inserted nuts follow DIN 985)

• Finish Options: Zinc-plated, black oxide, hot-dip galvanized, plain

Approx. Rs 8 / PieceGet Latest Price

Product Details:

Bottom Slotted Hex Head Bolt is a type of bolt featuring a standard hexagonal head with a slot machined on the underside (bottom) of the head. This slot is typically used for specific assembly or locking purposes, such as allowing a locking tab or wire to engage, preventing rotation or loosening.

🔩 Bottom Slotted Hex Head Bolt 📌 Key Features:

• Head Type: Hexagonal head with a slot on the underside (bottom) of the head

• Threading: Fully or partially threaded (depending on length and application)

• Material:

  • Carbon steel (grades 4.6, 8.8, 10.9, etc.)

  • Stainless steel (A2, A4)

  • Other alloys depending on application

• Finish: Zinc-plated, black oxide, galvanized, plain stainless

• Common Standards: Usually custom or specialized bolts, sometimes made to order or per specific industrial standards (not common in standard DIN/ISO catalogs)

Approx. Rs 8 / PieceGet Latest Price

Product Details:

Hex Head Bolt Pointed is a hexagonal head bolt where the tip of the threaded end is shaped to a point instead of a flat or chamfered end. This pointed tip helps in alignment, easy insertion, or piercing soft materials during assembly.

🔩 Hex Head Bolt with Pointed Tip 📌 Key Features:

• Head Type: Standard hexagonal head for wrench or socket tightening

• Tip: Threaded end tapers to a sharp or rounded point rather than a flat cut

• Threading: Fully or partially threaded

• Material:

  • Carbon steel (various strength grades)

  • Stainless steel (A2, A4)

  • Alloy steels as needed

Approx. Rs 2 / PieceGet Latest Price

Product Details:

A flat head M10x25 screw with a hole is a fastener with a flat, countersunk head, a thread size of M10 (metric 10mm), a length of 25mm, and a hole drilled through the screw head. It's commonly used when a flat head is needed for a flush or flush-with-the-surface finish, and the hole in the head allows for additional function or attachment. 

Approx. Rs 2 / PieceGet Latest Price

Product Details:

Hex Head Bolt DIN 931 is a partially threaded bolt with a hexagonal head, commonly used where shear strength is important or alignment is aided by the unthreaded shank. It's often used in mechanical, structural, and automotive applications.

🔩 DIN 931 – Hex Head Bolt (Partially Threaded) 📌 Key Features:

• Head Type: Hexagon (external)

• Threading: Partial thread (typically thread length = 2 × diameter + 6 mm for bolts up to 125 mm long)

• Standard: DIN 931 (equivalent to ISO 4014)

• Materials:

  • Carbon Steel: Grades 4.6, 8.8, 10.9, 12.9

  • Stainless Steel: A2 (304), A4 (316)

  • Other: Brass, titanium

• Finishes: Zinc-plated, hot-dip galvanized, black oxide, plain

Approx. Rs 1.5 / PieceGet Latest Price

Product Details:

The Hex Head Screw DIN 933 is a widely used metric fastener known for its full thread and external hexagonal head. It's often used in construction, automotive, mechanical, and general-purpose applications.

🔩 DIN 933 – Hexagon Head Screw (Fully Threaded) 📌 Key Features:

• Head Type: Hexagonal (external hex)

• Thread: Fully threaded along the entire length

• Standard: DIN 933 (equivalent to ISO 4017)

• Material Options:

  • Steel: Grades 4.6, 8.8, 10.9, 12.9

  • Stainless Steel: A2, A4

  • Brass, titanium, etc.

• Surface Finishes: Zinc-plated, hot-dip galvanized, black oxide, plain, etc.

• Drive Method: Spanner/wrench (external hex head)

Approx. Rs 300 / KgGet Latest Price

Product Details:

A Round Head Rivet M10x35 With Hole is a fastener that utilizes a round head design with a hole for enhanced fastening options. It's a robust solution for creating strong and secure connections, especially in applications requiring a more finished look and extra versatility. 

Approx. Rs 25 / PieceGet Latest Price

Product Details:

APL (Amit Fasteners) manufactures stainless steel fasteners, including bolts, nuts, screws, and washers. While specific details about their Antitheft Bolt are limited, APL's products are known for their durability and resistance to corrosion, making them suitable for applications where security is a concern

🔐 Break Away Security Nut

Break Away Security Nuts, also known as shear nuts or tamper-proof nuts, are designed to provide a permanent, tamper-resistant fastening solution. These nuts feature a hexagonal head that shears off when tightened to a specific torque, leaving behind a conical base that is extremely difficult to remove without specialized tools

Key Features:

• Material Options: Available in stainless steel 304, ZAMAC 5 zinc alloy, and aluminum. 

• Installation: Can be installed using standard spanners or sockets

• Applications: Commonly used in public infrastructure, automotive industries, and areas requiring high-security fastening.

Approx. Rs 3 / PieceGet Latest Price

Product Details:

A double-ended threaded stud, also known as a double-end threaded rod or a tap-end stud, is a fastener with threads on both ends of a cylindrical body. The threads are typically equal in length on both sides, but can also have differing thread lengths. The unthreaded portion of the stud's body allows for engagement with two separate components, facilitating secure fastening. 

Approx. Rs 5 / PieceGet Latest Price

Product Details:

10x25mm Flat Head Pin with Hole is a cylindrical metal pin used for precise locating, fastening, or alignment purposes. The flat head provides a flush or low-profile finish on one end, while the hole near the opposite end is usually for securing the pin with a split pin, wire, or cotter pin to prevent axial movement.

🔩 10x25mm Flat Head Pin with Hole 📌 Specification:

• Diameter: 10 mm

• Length: 25 mm (overall length excluding or including the head, check with manufacturer)

• Head Type: Flat head (low profile, designed to sit flush or slightly proud of the surface)

• Hole: Typically a small drilled hole near the non-head end for securing with a cotter pin or wire

• Material:

  • Steel (often hardened or case hardened)

  • Stainless steel (A2, A4) for corrosion resistance

  • Other materials (brass, alloy steel) available depending on application

• Finish: Plain, zinc-plated, black oxide, or stainless steel natural finish

Approx. Rs 10 / PieceGet Latest Price

Product Details:

Stainless Steel U-Bolt is a U-shaped fastener with threaded ends, used primarily to clamp or secure pipes, tubes, or round objects to a surface or frame. Thanks to stainless steel, it's highly resistant to corrosion, making it ideal for marine, chemical, or outdoor applications.

🔩 Stainless Steel U-Bolt 📌 Key Features:

• Shape: "U" with machine threads on both ends

• Material:

  • Stainless Steel A2 (304): General corrosion resistance

  • Stainless Steel A4 (316): High resistance to saltwater, acids – suitable for marine or chemical environments

• Finish: Polished, passivated, or plain (depending on application)

• Threads: Typically metric (M6, M8, M10, etc.) or UNC (imperial)

Approx. Rs 3 / PieceGet Latest Price

Product Details:

Hexagon Socket Head Cap Screw DIN 912 is a standardized fastener, commonly used in machinery, automotive, and construction due to its high strength and compact head design. Here's a quick overview:

🔩 DIN 912 – Hexagon Socket Head Cap Screw 📌 Key Features:

• Head Type: Cylindrical head with internal hexagon (Allen drive)

• Standard: DIN 912 (equivalent to ISO 4762)

• Material: Often made from steel (grades like 8.8, 10.9, 12.9), stainless steel (A2, A4), titanium, brass, etc.

• Finish: Plain, zinc-plated, black oxide, hot-dip galvanized, etc.

• Drive Type: Hex socket (Allen key)

• Thread Type: Metric coarse (most common), but can also be fine thread

Approx. Rs 2 / PieceGet Latest Price

Product Details:

Hex Flange Nut DIN 6923 is a hexagonal nut with an integrated flanged base that acts like a built-in washer. This design distributes the clamping load over a larger area, improving load-bearing and reducing the chance of damaging the surface under the nut.

Hex Flange Nut – DIN 6923 �� Standard:

• DIN 6923

• Replaced in part by ISO 4161, but still widely used in industry

Key Features:

• Flanged base distributes load without needing a washer

• Can include serrations under the flange (for locking action, often called serrated flange nuts)

• Reduces chance of the nut loosening under vibration

• Compatible with standard bolts or threaded studs

Approx. Rs 2 / PieceGet Latest Price

Product Details:

A Hex Head Bolt with Hole is a fastener with a six-sided head and a hole drilled through it. This hole is typically used for securing the bolt with a pin, wire, or other locking device, preventing loosening due to vibration or rotation. It's a versatile fastener used in various applications like machinery, equipment, and construction. 

Approx. Rs 3 / PieceGet Latest Price

Product Details:

A cone point socket set screw is a fastener that features a conical point at the tip and a socket-head design. The conical point is designed to penetrate and grip the surface it is pressed against, while the socket head allows for easy tightening with a wrench. These screws are commonly used for securing parts together, especially when a strong hold and permanent fixation are required

Approx. Rs 2 / PieceGet Latest Price

Product Details:

A pan head self-drilling screw is a fastener with a rounded head that is relatively flat on top and on the bottom. It has a built-in drill point at the end, allowing it to drill and tap its own threads into the material it's being fastened to, eliminating the need for a pre-drilled pilot hole. 

Approx. Rs 4 / PieceGet Latest Price

Product Details:

Slotted CSK (Countersunk) head screws are screws with a flat head that sits flush with the surface, typically used in precision engineering and for fastening machine components, tools, and electronic parts. They are also known as flat-head screws. The head has a slot for a flat-blade screwdriver. 

Approx. Rs 2.5 / PieceGet Latest Price

Product Details:

A pan combi head screw with a built-in washer is a fastener that combines a flat, rounded head with a Phillips or slotted drive, and a washer integrated into the head. This combination provides a secure and robust fastening solution with additional protection against damage and uneven load distribution. 

Approx. Rs 3 / PieceGet Latest Price

Product Details:

A slotted CSK (Countersunk) self-tapping screw is a type of fastener designed to create its own thread in a material like metal, plastic, or wood, while providing a flush surface

Approx. Rs 1.5 / PieceGet Latest Price

Product Details:

A slotted round head screw is a threaded fastener with a rounded head and a slot for a flathead screwdriver. These screws are commonly used for applications where a smooth, non-countersunk surface is desired, and are often found in industries like woodworking, construction, and electronics.